1. General User Information
1.1 About this instruction manual
This instruction manual provides the user with helpful information about the entire life cycle of the BactoSwitch. Before commissioning and using the BactoSwitch, the user should be completely familiar with this instruction manual. As the BactoSwitch is an accessory of the BactoSense, the user should also be familiar with the BactoSense user manual. All bNovate manuals can be found online at www.bnovate.com/user-manuals.
This instruction manual is intended for all persons who are responsible for the operation and maintenance of the instrument. This document is part of the product. It should be stored in a safe place and always be available to the user.
A list with all bNovate representatives can be found on our website: www.bnovate.com/distribution-partners.
Additional associated product documentation can be found in the table below.
Table 1-1 Additional documentation
| DOCUMENT | TITLE | CONTENT |
|---|---|---|
| UM-0006 | BactoSense User Manual | Sophisticated menu functions, connectivity solutions and work steps for advanced users. |
| CER-50117 | CE declaration of conformity | Compliance with the underlying directives and standards. |
| CER-50118 | UKCA declaration of conformity | Compliance with the underlying directives and standards. |
| CER-50119 | CB test certificates | UL/CSA/FCC test certificates, also under DE-6-T2502195 and DE-6-T2600373 on certificates.iecee.org. |
1.2 Declaration of conformity, norms and classifications
Current technological principles were followed in designing and manufacturing the instrument. They comply with the applicable guidelines concerning safety and the duty to take due care.
The instrument meets all applicable requirements within the European Union (EU) for carrying the CE mark.
The instrument meets all applicable requirements for carrying the UKCA mark.
The instrument is UL/CSA/FCC compliant.
For more details, please refer to the separate declaration of conformity.
This device is protected from total dust ingress and from low pressure water jets from any direction (IP65).
Table 1-2 Compliance and certifications
| COMPLIANCE AND CERTIFICATIONS | |
|---|---|
| Regulatory compliance | CE UKCA RoHS FCC compliant |
| Applied EMC standards | IEC 61326-1:2021 EN 55011:2016 IEC 61000-3-2:2019/A2:2024 IEC 61000-3-3:2013/A2:2021 CFR 47 Subpart B, §15.107, §15.109 ICES-001 Issue 5, §3.2.1, §3.2.2 |
| Applied safety standards | IEC 61010-1:2010/Amd1:2019 CISPR 11:2024 CAN/CSA C22.2 No. 61010-1-12/UPD4:2024 UL 61010-1:2012/Amd1:2024 JIS C 1010-1:2019 EN 60529:1989 |
For more details on the CE mark, please refer to the separate declaration of conformity. For UL/CSA/FCC compliance, please refer to the CB test certificates.
1.3 Safety symbols
The symbols below identify hazards and required protective equipment. Warning and Caution use the same exclamation symbol; read the title and instructions in every box.
Electric shock that may result in serious injury or death
Ignoring this notice may lead to electrical shocks and death.
Explosion that may result in serious injury or death
Ignoring this notice may cause explosions resulting in serious property damage and death.
Injury or hazards to health with long-term effects
Ignoring this warning may lead to injuries with possible long-term effects.
Ignoring this notice may cause material damage to the instrument and its peripherals.
Mandatory protective equipment
Wear the specified protective gloves when handling tubings, sampling devices or components that come into contact with them.
1.4 Pictograms
All pictograms used in this document are explained below:
Additional information about the current topic.
1.5 Intended use of the BactoSwitch
The BactoSwitch is an accessory for the BactoSense CORE or BactoSense SMART, serial number 910500 onwards, software version 3.1.0 onwards.
The intended use of the BactoSwitch is to sequentially route water from each of its four inlets to the attached BactoSense instrument, to the integrated flowmeter and finally to the drain.
The BactoSwitch (and BactoSense) must be operated by trained technical personnel who have read and understood the content of both user manuals.
1.6 Usage restrictions
Operation in explosive areas can cause explosions, which can lead to the injury or death of persons in the vicinity.
- It is not permitted to operate the instrument in explosion hazardous areas or rooms.
- It is not permitted to use the instrument with explosive sample substances.
1.7 Improper use
Improper use of the instrument can cause injuries to persons, process-related consequential damage and damage to the instrument and its peripherals. In the following cases the manufacturer cannot guarantee the protection of persons, the instrument and surrounding equipment, and therefore assumes no legal responsibility:
- The instrument is not used in the described area of application and intended use.
- The instrument is not installed, mounted, set up or transported in accordance with the user manual.
- The instrument is not operated in accordance with the user manual.
- The instrument is operated with accessory parts or consumables which bNovate Technologies SA has not specifically provided, approved or recommended.
- The instrument underwent improper changes or modifications.
- The instrument is operated outside of the specifications, in particular pressure, temperature and power.
- The instrument is operated with a different power supply unit.
- The instrument is exposed to vibrations, shocks, or other mechanical forces.