8. Storage, Transport and Disposal
8.1 Storage
Avoid contamination of the equipment. Wear nitrile gloves when handling tubings and online sampling devices and any component which comes in contact with them.
Preparations
Flow meter damage by pressurized air
Do not connect pressurized air to the BactoSwitch input connectors in an attempt to drain it: this may irreversibly damage the flow meter.
Storage
Store the BactoSwitch and the accessories listed in Table 4-1 in their original packaging and in the following storage conditions:
- Temperature between 10 °C and 30 °C (50 °F – 86 °F)
- Relative humidity between 10 % and 70 %
- Non-vibrating, non-corrosive, dark and clean environment
- Store the tubings and online sampling device in a clean, dry plastic bag
Re-installation
After storage, follow the general installation instructions described in Installation.
8.2 Transport
Adhere to shipping instructions
bNovate does not take responsibility for deliveries which do not comply with our shipping regulations and will charge for repairs. Please contact support@bnovate.com if the original packaging is no longer available or you need help with packaging.
- Pack the BactoSwitch in its original packaging with foam inserts.
- Ship on a pallet or skid.
8.3 Returns
In case you return the BactoSwitch to bNovate or a distribution partner, please follow the instructions in this section.
Do not return contaminated materials
Instruments that have come into contact with hazardous media must be decontaminated before shipment and must be accompanied by a certificate of decontamination. Contact support@bnovate.com for more information.
Preparations
| WORK STEP | |
|---|---|
| 1. | If the instrument has been exposed to hazardous substances, fully decontaminate it and provide a certificate of decontamination. |
| 2. | Follow the preparation procedure given in Storage. |
| 3. | Pack the BactoSwitch and its accessories listed in Table 4-1 in its original packaging with foam inserts. Tubings and the online sampling device must have been drained and packed in a clean plastic bag. |
Return
Ship the BactoSwitch to bNovate or the distribution partner, adhering to the transportation recommendations given in Transport and the general storage temperature and humidity requirements listed in Storage.
8.4 Recycling and disposal
The disposal of the BactoSwitch has to be carried out in compliance with regional statutory regulations. The BactoSwitch contains no environmentally damaging sources of radiation.
Table 8-1 Materials and their recycling or disposal
| CATEGORY | MATERIALS | DISPOSAL POSSIBILITIES |
|---|---|---|
| Packaging | Cardboard, wood, paper | Reuse as packaging material or dispose for recycling |
| Protective foils, polystyrene shells | Reuse as packaging material or dispose for recycling | |
| Metal structure | Stainless steel | Recycling via metal waste |
| Electronics and solenoid valves | Printed circuit boards, electro-mechanical components | To be disposed of as electronic waste. Follow the local legislation. |
| Front cover | Plastic (ABS V0) | Local disposal center |

